Flexible End Caps
Manufactured from EPDM elastomer and supplied with an all-stainless steel worm drive clip the end caps provide a neat and easy solution for blanking-off pipework in drainage and other non-pressure applications.
The fittings are suitable for the following pipework connections:-
Imperial, Metric and other non-standard pipe sizes.
These fittings are not pressure rated and should not be used for pressure applications.
Due to their flexible nature these fittings can accommodate minor variations in diameters.
The flexible end caps are suitable for both metric and near-similar sized imperial pipework. For example a 63mm coupler can also be used with 2" (60.3mm o.d.) imperial pipe.
The following table details the range of recommended pipe sizes that can be used for each fitting:-
|25 mm||3/4" (26.7mm)||28 mm||24 mm|
|32 mm||1" (33.6mm)||35 mm||31 mm|
|40 mm||1 1/4" (42.2mm)||42 mm||38 mm|
|50 mm||1 1/2" (48.3mm)||51 mm||47 mm|
|63 mm||2" (60.3mm)||64 mm||59 mm|
|75 mm||2 1/2" (75.2mm)||76 mm||73 mm|
|90 mm||3" (88.9mm)||91 mm||88 mm|
|110 mm||4" (114.3mm)||115 mm||109 mm|
NB* The nominal bore or approx internal pipe diameter. The mm figure in brackets is the outside diameter of imperial pipe.